Over the years, I have seen so many adorable plush toys that my Beginner Sewing group members on Facebook have made. And although I do think a beginner can tackle a plush toy (and many have!), I also see some a little intimidated by it. When I came across this free sewing pattern and tutorial from All About Quilts, it was perfect. I thought this just might be a good “gateway” project to get those intimated to try.

I also wanted to point out what a great memory project this would be for children who have lost a loved one. Adding a heart to the bunny using old clothes from their loved one, and perhaps the ears to match. What a sweet gift that would be to give!

This is also a cute idea for upcycling other fabrics as well. So many options to make it a unique, one-of-a-kind project. And it included the pattern to pint out that did not take you on a wile goose chase to download “this and that” before you won the prize of the free pattern.

NOTE: I have added in the measurement conversions for your convenience.

Not ready to sew this project yet? You can pin it here and save it for later:


Make your own snuggle bunny toy using my free pattern. You can use any fabric you like for this bunny toy – towelling, fleece, cottons, minky or even old clothes. I made mine from minky and 100% cotton. Minky comes in a range of textures which makes it a great toy for the very young to explore.

I found a great online shop for top quality minky called The Minky Boutique. This is where I have bought quite a bit of my minky fabric and I’ve been delighted with the quality. Both toys above are made in minky fabric from this shop. (If the redirection gives you a warning ‘not secure’ then please type it into Google ‘The Minky Boutique’ and visit it that way).

My pattern requires small amounts of fabric so this is often able to be made out of left over fabrics… not that I’m discouraging you from a trip to the shops!

Oh and here is Snuggle Bunny’s best friend Snuggle Elly and I have included Snuggle Elly in the pattern as well. 

Click to download Page 1
Click to download Page 2
Click to download  Page 3
Bunny Pattern

The following tutorial is for Snuggle Bunny Lovey.


Requirements

  • 30cm of main body fabric (approx 12″)
  • 30cm of contrast body fabric (approx 12″)
  • small fabric pieces for inner ears – 2 different prints
  • small amount of stuffing for head & tail
  • heavy thread for eyes & mouth
  • snap for hand

Cut out all your pieces as shown on each pattern piece

Fabric pattern pieces cut out

You will have:

From Main Fabric:

  • 1 x body piece
  • 2 x head pieces
  • 2 x ear pieces
  • 2 x tail pieces

From Main Contrast Fabric:

  • 1 x body piece

From  100% Cotton Fabrics

  • 2 ear pieces in different fabrics

Remember to mark the eye, ear and tail placement guides. My ear & tail placement guide lines are very, very generous so don’t cut them until you are ready to insert the ear & tail pieces.

All seam allowances are 1/4-inch unless otherwise stated. Also, make sure to back stitch at the beginning and end of each seam.

I like my snuggle bunny toys to have the inner ear and tummy fabric cut slightly smaller so that the main fabric rolls over the edge – personal preference!! If you also would like to do this then you need to position the pattern piece just over the fabric fold as shown below. So easy!

Toy body piece


Sewing the Ears & Tail

Pin the ear pieces, each ear having one piece of main fabric and one piece of contrast fabric, right sides together and sew them together with a 1/4″ seam, leaving the straight edge open. If you have cut your inner ear pieces smaller like I have then you will have a slight surplus of main fabric as can be seen on the left ear below – don’t worry this is just as it should be.

Bunny Ears & Tail Sewn

Sew together the two tail pieces, right sides together with a 1/4″ seam, leaving the straight edge open at the base of the tail for turning and light stuffing.

Clip around the curved edge of both ears and tail pieces being careful to not clip the stitches. Why clip? – this helps the seam allowance to sit better when they are turned.

Toy ears & tail turned

Turn both pieces right side out. See how the main fabric folds over the ears edge – I love this look! Lightly stuff the tail. Press with care if you have used minky fabric.

Toy ears folded

Now fold ears as shown above and pin in place. Leaving the pins in for the next step can prove a bit problematic so if you’d prefer you can tack or machine stitch to hold them in place.

Sewing the Head

Pin the head pieces right sides together and sew them together with a 1/4″ seam, leaving the bottom straight edges open.

Now we will attach the ears to the head. Measure ears width at their base. Cut a slit the same width as the ears base where indicated on the pattern. 

Toy bunny head stitched

Insert the ears up through the neck. This is a bit tricky and you’ll need a bit of patience but it’ll be worth it.

Pin both ears in place as shown below and stitch across both ears and head center securing the ears in place. You will need to taper the stitching at the beginning & end of the row. No 1/4″ seam allowance used here!

Ears attached to head

Turn right side out and stuff the head moderately. No need to stuff the neck as most of the neck will be inserted into the body.

It is now time to add the eyes and mouth if you choose to. 

The face of your bunny is a very personal thing and will give your bunny its own unique personality so don’t worry if it doesn’t look just like mine.

Using the black embroidery thread (or similar) create the eyes by:

  • a couple of french knots in the same spot or
  • stitching a simple X or
  • Sleeping eyes with lashes like mine

I used a very long needle to do this and this does make it easier but it is not essential. The needle I use is a Doll needle and is shown in the photo below.

Hide your loose thread ends inside the stuffing.

Stitch eyes

Sewing the Body

First we will attach the tail to the body. Measure tail width at base. Cut a slit the same width as the tail base where indicated on the pattern and insert the tail from the right side.

Pin in place as shown below and stitch across securing the tail in place. You will need to taper the stitching at the beginning & end of the row. Again no 1/4″ seam allowance used here.

Tail placement

Next pin the body pieces right sides together and sew them together with a 1/4″ seam, leaving the neck edge open & taking care not to stitch over the tail. If you have cut your tummy body smaller like I have then you will have a slight surplus of main fabric. Don’t worry this is just as it is suppose to be.

Body front and back sewn together

Clip the curves and then turn the body right sides out. Back & front of my bunny below.

Body turned right side out


Attaching the Head to the Body

Head attached to body

Place the head inside the opening at the top if the body & pin in place. No need to leave a long neck showing. Sew together through all layers using a zipper foot on your machine taking care to catch all the layers.

You will notice that I added a snap closure to one of the bunny’s arms – this was so that a teether ring could be attached or a clasp attached so that it can be clipped onto a pram.

Your Snuggle Bunny toy or Snuggle Elly toy are now ready to become someones best friend!

Finished Bunny Toy

This one is based on Dr Seuss’s Horton (which is the theme of her bedroom) but in the colours of Frozen, requested by 4 year old Bella.

And here’s the white rabbit from Alice in Wonderland for my other granddaughter.

Joan Mantini

About Joan Mantini

After several years of being the Facebook page owner at Beginner Sewing, I noticed there was a desperate need to have a single go-to spot for members to be able to find answers to their common questions, get some useful tips & tricks, as well as find reputable places to purchase sewing products online. Taking my role as a trade publication editor by day, and combining it with my knowledge of frequently requested beginner sewing advice, I created www.https://beginner-sewing.com/. An outlet that gives new sewists a free digital magazine geared for entry level sewing as an extra bonus!

One Comment

Leave a Reply